However, bear in mind that applying an earlier build might not always be possible. On the other hand, downgrading the camera’s firmware can recover its functionality in the unlikely event the currently installed version is faulty or the device’s performance dropped after an upgrade. Updating to a newer firmware version than the one already installed on your camera can improve the device’s overall performance and stability, resolve various issues, and add support for newly developed features or enhance existing ones.
The camera is now ready for use as a USB drive.After about 4 seconds the process is complete and the yellow LED will turn off.The camera will automatically be connected as a removable device.The firmware file will be automatically deleted.After a second or two the yellow LED will turn on.After another 7 seconds the blue LED will turn off.The blue LED will turn on for about 13 seconds and then begin Wait until all the LEDs are turned off.Disconnect the camera from the computer and wait until it turns off.Copy the new firmware file into the camera's flash card root folder.Connect the camera to the computer and wait until the card is recognized as a Removable Drive.
There are two methods with which you can update the firmware. Now all photos will have the same correct RGB settings that were detected when the lock was set.ĭO NOT PRESS ANY BUTTONS during the firmware update process. A bug fix for Photo Mode Auto WB lock that caused the RGB settings to shift to a different set of fixed values after the first WB-locked photo was shot. The recording will continue during the lock setting process even when the LED turns off while setting the lock.Ģ. It will stay off until you release the Mode button, then it resumes blinking indicating it is still recording. In the video modes, the lock can still be set with a long press of the Mode button while the camera is recording, but now the colored LED blinking (if it is configured to turn on while recording) will momentarily turn off to confirm when the lock is set. It will stay off until you release the Mode button, then turn back on solid indicating it is still in a Standby condition. For the photo and video modes, setting the lock while the camera is in Standby condition will momentarily turn off the colored LED to confirm when the lock is set. Modified the Mode LED activity when it is long pressed (~3 sec.) to set the Auto White Balance and/or Auto Exposure lock to provide positive visual feedback when the lock is set.
0 kommentar(er)
